Ways to Get an Old Ripped Phone Charger to Work Again
If you accept always had a telephone charger break on you and wish you could easily fix it? You can! And today I am going to show yous How to Fix a Broken iPhone Charger . Don't worry you can apply this same trick to set up any phone charger, not just an iPhone. Keep reading for all the details and supply list! (And if y'all have ever croaky a device screen, check out my post virtually how to fix a broken iPad screen HERE.)
A big huge cheers to Wagner for making today's post possible. All opinions are mine. This post contains affiliate links. Past making a purchase through them I receive a small commission only you never pay a penny more than. Thank you for supporting my site.
How to Fix a Broken iPhone Charger
We have more devices in my home so I care to acknowledge, and it seems similar one is e'er breaking. Unfortunately, iPhone cords are expensive to supersede, so I decided to fix my cleaved phone charger instead!
Fixing a broken telephone charger is more environmentally friendly (we don't need more phone cords in landfills), and this method will also salve yous a ton of money in the cease also!
Plus it is so easy to exercise, anyone can exercise it!
How exercise you set up a broken charger?
The easiest way to set a broken charger is by using heat compress tubing and a heat gun. Information technology only takes a few minutes and anyone can get this to await really dainty!
You will want to make certain you choose the right type of heat shrink tubing though. Because the charger head and the cord are so different in size, you need to buy heat shrink tube that is large enough to fit over the head but will shrink enough to get a tight fit around the cord.
I used these HEAT SHRINK TUBES and this HEAT GUN.
You will only put the estrus shrink tube over the phone cord ensuring information technology is covering function of the head and past the place where the string is breaking, and so utilise your heat gun to shrink the tube!
It's so simple, but keep reading considering I am sharing a few more tips afterward in my post that you don't want to miss.
Why did my charger suddenly end working?
Chargers can all of a sudden stop working for several reasons. The string could be breaking or the charging port or USB port could be broken. If the connectedness ports are broken, you will demand to supplant your phone charging cable. (I like these ones Here.)
But if your cable is cleaved, you may be able to fix it.
I will say though, that this technique to fix a cleaved iPhone charger works best if the string is bent or coming apart, but still works. This is the best style to salve a string from fully breaking.
If your string is fully broken, it may exist time to supervene upon it. (Again, I similar these ones Hither.)
Why do iPhone chargers break so easily?
iPhone chargers suspension and then easily because the connection point between the wires and the charging port can be weak. And most of united states tend to pull the charger by the cord instead of the head which weakens this connection further.
Plus, if you ever accuse your phone while looking at it and you happen to rest it, you may be bending the cord which will further lead this connection to weaken.
What can I practice to make my phone chargers last longer?
- Just remove cords by the plug caput, never the string
- Don't let the cord curve
- Secure and strengthen the string connectedness area using heat shrink tubing
How to use rut shrink tubing to gear up a broken iPhone charger
The best way to preserve, strengthen and lengthen the usage from an iPhone charger, fifty-fifty if it is already breaking, is to use heat compress tubing to fix it. Here is what you lot demand to do:
Purchase Heat Shrink Tubing
Because at that place is a big difference in size between the cord and charging heads, yous need to get heat shrink tubing that volition shrink a lot.
All cords may be different in size, so it is of import to measure your string and order the heat shrink tubing that will fit your cord the best. I tin not guarantee that what I used will work for you, so do your research first.
I bought these HEAT SHRINK TUBES because they accept a 3:ane heat shrink ratio. A ii:1 heat compress ratio is simply not enough for a typical iPhone charger. The 3:1 is what yous want.
You tin can choose between and so many colors, but I decided to use clear heat shrink tube so that the fix was barely noticeable.
Purchase a Heat Gun
It is important to choose a great heat gun to get this job done correct.
I have had several heat guns in my life, but I just received the brand new Estrus Gun HT400 from Wagner.
Later on using this heat gun, there are a few things I dear nigh it:
- information technology is meaty and easy to hold
- it fits comfortably in my minor hands
- dual temperature settings perfect for a variety of jobs
- perfect for small, intricate projects and arts and crafts projects as well
- can be used for craft projects like embossing and jewelry making
- can be used for removing stickers and shrink wrapping packages
- is able to be used hands-complimentary
Run across More Means YOU CAN USE THE WAGNER HT400 HERE.
I also love that the price is totally reasonable for this estrus gun too!
Purchase THE WAGNER HT400 HEAT GUN Here.
Prepare Heat Shrink Tubing
You volition desire to choose the right size tubing for your project. Y'all want it to be as small-scale as possible, while withal fitting over the head of the charger.
In one case you have picked a size, you will cut it to length with scissors. Yous will want the tubing to embrace part of your charging head, only non all of it. If you cover all of your charging head, it may not fit as tightly when yous charge information technology leading to an insecure fit and a bad charge.
You also want the length of your tube to more than than cover where the string is cleaved or bending. Roofing about an inch or so of the string is a great place to begin.
Heat the Compress Tubing with a Estrus Gun
Because the tubing and cord will get warm when using a oestrus fun on it, I used a pair of pliers to concur my heat compress tubing onto my iPhone charger. Then I only turned the heat gun on the LOW setting and moved information technology all around the estrus compress tubing.
Later a few seconds, the tubing will begin to shrink.
You desire to shrink the tubing until you have a tight secure fit around the head and the string.
I just absolutely Honey how quick it is to ready a broken iPhone charger! It takes only a few minutes of fourth dimension and you tin hands set up and secure all of your charger cords.
When I was fixing my string, my hubby actually asked me if I could fix his too. I was so happy to be able to fix both of our cords in just a few minutes of fourth dimension.
And I have a stash of heat shrink tubing now to fix whatever other cords that we may need to set in our home.
Read more about the Wagner HT400, how yous tin can use it, and tips and tricks plus more nigh this projection HERE.
If y'all enjoyed this post, you might enjoy these posts too:
How to Fix a Cleaved iPad Screen
How to Child-Proof an iPhone or iPad
How to Clean an RV
How to Paint Wood Chairs
Source: https://www.simplydesigning.net/how-to-fix-a-broken-iphone-charger/
0 Response to "Ways to Get an Old Ripped Phone Charger to Work Again"
Post a Comment